1. Home
  2. What is a punch list?

Explainer

What is a punch list?

The meaning of a construction punch list, where the name comes from, how it relates to a UK snag list, and how to write one that actually gets cleared.

Updated 3 November 2026 · About 8 minutes to read

In short: a punch list is a list of defects, incomplete work and items that don't match the specification, put together near the end of a construction project. Each item is assigned to someone to fix, then checked and signed off, so the work can be accepted and the building handed over. In the UK and Ireland the same thing is usually called a snag list.

What a punch list is

On any construction project — a new house, an office fit-out, a kitchen extension — there comes a point where the work is essentially finished but not quite right. A door binds, a socket doesn't work, there is paint on a window, a ceiling tile is cracked. None of these stop the building being used, but the client is entitled to have them put right before the job is considered complete.

The construction punch list is the document that captures all of those items in one place. It typically records, for each item:

  • where the issue is (building, floor, room, elevation)
  • what is wrong, and what the expected result is
  • which trade or subcontractor is responsible
  • a photo, so there is no argument about what was meant
  • its priority, the date it was raised and its current status
  • who checked the fix and when it was signed off

Punch list items are normally small. If something on the list is a major failure — a leaking roof, say — it is still recorded, but it may also be dealt with under the contract's defect provisions rather than as a routine closeout task.

Where the term "punch list" comes from

No one knows for certain. The explanation you'll hear most often is that inspectors would literally punch a hole in the margin of a paper list next to each item once it had been completed, giving a quick visual record of what was finished. It is a neat story, but treat it as tradition rather than documented history. Whatever the origin, the phrase stuck in North American construction, and "punching out" a job now means working through the list until nothing is left on it — getting the punch list to zero.

When a punch list is used

The classic punch list is created at substantial completion (US) or practical completion (UK) — the point where the building can be used for its intended purpose. The client, or their representative, walks the project with the contractor and records everything still outstanding. Contracts often link the final stages of payment, or the release of retention money, to the punch list being closed out, which is why contractors are keen to keep it short.

In practice, punch lists are used at several other points too:

  • Before handover inspections, when a contractor walks the site first to catch problems before the client does
  • At the end of each phase or floor on larger projects, before follow-on trades cover up earlier work
  • On each unit or plot of a housing development, before it is shown to a buyer
  • By homeowners on a new build snagging inspection, before or shortly after moving in
  • By landlords and property managers when checking a refurbished or empty property

Who creates the punch list?

It depends on the contract and the size of the job. On commercial projects, the architect, contract administrator or owner's representative usually leads the walk-through and issues the list. On smaller jobs, the main contractor or site manager often writes it, then shares it with the client for comments. Subcontractors keep their own lists for their trade, and homeowners buying a new build produce their own snag list for the developer. However it is created, everyone should be working from one shared list — the moment there are two versions, items fall through the gaps.

Punch list vs snag list: is there a difference?

Not really. They are the same idea under different names:

TermWhere it's usedNotes
Punch listUSStandard term in American construction; "punch walk" for the inspection
Snag listUK, Ireland"Snagging" is the process; each defect is a "snag"
Deficiency listCanadaCommon alongside "punch list"
Defects listVariousAlso used for issues found during a warranty or defects period

If anything, "snagging" is used a little more broadly in the UK — homeowners talk about snagging a new build, which is less common phrasing in the US. But the document, and what makes it work, is identical.

What makes a good punch list item

A punch list is only as useful as its weakest item. Good items share a few traits:

  1. One defect per item. Combining issues means one gets fixed and the other is forgotten — or the item can't be closed because half of it is still outstanding.
  2. A precise location. "Level 2, Apartment 4, bathroom, wall behind basin" lets a tradesperson go straight to it.
  3. An objective description. Say what you see and what is expected: "Tile cracked, 2nd row up, 3rd from left — replace".
  4. A clear owner. Assign the trade or company responsible, so nobody can assume it belongs to someone else.
  5. A photo. Ideally with the problem circled or marked. It saves more back-and-forth than anything else.
  6. A status and dates. Open or resolved, date raised, date resolved. That's what lets you report progress and prove an item was closed.

Our free punch list template is laid out around exactly these fields, and the construction punch list checklist gives you trade-by-trade prompts for what to look at.

Common punch list mistakes

  • Waiting until the very end. Problems found after the flooring goes down or the decorators leave are slower and costlier to fix. Walk areas as they finish.
  • Vague wording. "Check doors" or "make good" invites a quick once-over rather than a fix.
  • Lists that never shrink. Without regular re-inspection, items stay "open" long after they are done, and the list loses credibility.
  • Lost photos. Pictures taken on one person's phone and never attached to the item are no help to anyone else.
  • Too many copies. Emailed spreadsheets fork into versions; nobody knows which one is current.
  • Marking items fixed without checking. Only the person who raised an item, or the client, should close it.

Paper, spreadsheet or app?

All three work, and the right choice depends on the size of the job.

  • Paper is quick to start and needs no battery, but photos are separate, the list has to be re-typed to share it, and it's easy to lose.
  • Spreadsheets are easy to filter and share, but awkward to fill in on a phone while standing in a stairwell, and photos are usually stored somewhere else.
  • A punch list app puts the photo, location, trade and status on the same item, works on the phone in your pocket, and produces a report without any re-typing.

Punch Zero is a punch list app built for exactly this. You organise work by project, log each defect with photos you can mark up (draw, circle or rectangle, in different colours), dictate notes by voice, tag the trade, and switch items between open and resolved. One tap generates a PDF punch list report, filtered by trade if you like, which you can share by email or WhatsApp. It works offline on site and syncs between the Android app and the web app.

Punch it out

Get your punch list to zero, faster

Photos, annotations, voice notes and one-tap PDF reports. Try every feature free for 7 days.

iOS coming soon.